AIm Create journal

DOTS calculator: your DOTS and Wilks score

Enter your bodyweight and your squat, bench and deadlift total to get a DOTS score and a Wilks score. Either number lets you compare lifters of different sizes.

Updated: 2026-11-16

Calculator

Sex
Units
DOTS405.05
Wilks (1994)400.50
Add up the three lifts for the total

What the two scores are

DOTS is a bodyweight adjusted score: your total in kilograms times 500, divided by a polynomial of your bodyweight, with one set of coefficients for men and one for women. It came from the German powerlifting federation BVDK, written by Tim Konertz, and is widely used for team scoring and for comparing people across weight classes.

Wilks is the older formula of the same shape, with a fifth degree polynomial. This page uses the original 1994 coefficients. There is also a 2020 revision with different numbers, so a Wilks score from another calculator can differ from the one here. The IPF stopped using Wilks and now ranks lifters with IPF GL points, so for current federation results look at DOTS or IPF GL; Wilks stays useful for comparing against older numbers.

Both scores come out near 400 for the example above, an 83 kg man with a 600 kg total: DOTS 405.05 and Wilks 400.50. The score of a lifter with a total twice as heavy at twice the bodyweight is not twice as high: that is the adjustment doing its job.

The formulas

DOTS = total x 500 / (a + b x + c x2 + d x3 + e x4), where x is bodyweight in kilograms and the total is in kilograms. For men a = -307.75076, b = 24.0900756, c = -0.1918759221, d = 0.0007391293, e = -0.000001093. For women a = -57.96288, b = 13.6175032, c = -0.1126655495, d = 0.0005158568, e = -0.0000010706.

Wilks = total x 500 / (a + b x + c x2 + d x3 + e x4 + f x5). For men a = -216.0475144, b = 16.2606339, c = -0.002388645, d = -0.00113732, e = 7.01863e-06, f = -1.291e-08. For women a = 594.31747775582, b = -27.23842536447, c = 0.82112226871, d = -0.00930733913, e = 4.731582e-05, f = -9.054e-08.

Pounds are converted to kilograms first (1 lb = 0.45359237 kg). The formulas are only defined for a range of bodyweights: this calculator holds the bodyweight to 40 to 210 kg for men and 40 to 150 kg for women in DOTS, and to 40 to 201.9 kg and 26.51 to 154.53 kg in Wilks, the same bounds OpenPowerlifting applies, and tells you when it did.

Which total to enter

In powerlifting the total is the sum of your best successful squat, bench press and deadlift. If you train without competing, use your best recent single for each lift, or an estimated one: the 1RM calculator turns a set of several reps into a one rep max, and the RPE calculator does it from a set you stopped short of failure. Open the three lifts box under the result and the total fills itself.

The score says nothing about how well you move or how consistent you are. Two lifters with the same score can have very different totals and very different bodyweights, which is the point of it.

Logging your lifts in a journal

A score is only worth watching over time, and that needs the lifts and your bodyweight in one place. In AIm you log each set with its weight and reps, in the app or by telling Claude or ChatGPT what you did, and your bodyweight on its own screen or the same way. AIm does not calculate DOTS or Wilks itself: it keeps the numbers and shows the estimated max of each exercise on that exercise's progress page, and you enter the best of them here when you want a score.

Other tools in this set: the 1RM calculator (your one rep max from any set), the RPE calculator (the RPE chart and working weights), the plate calculator (plates per side for a barbell), the tonnage calculator (the volume load of a workout).

Sources

The DOTS coefficients agree in the first two, the Wilks coefficients in the next two. OpenPowerlifting also names the author of DOTS and explains why the formula exists.

Frequently asked questions

How is the DOTS score calculated?

Multiply your total in kilograms by 500 and divide by a fourth degree polynomial of your bodyweight in kilograms. Men and women use different coefficients. The formula is written out above with every coefficient.

What is a good DOTS score?

There is no official grade. The score rises as your total rises against your bodyweight, so compare your own score over time first. To see where it stands among competitors, OpenPowerlifting lists the DOTS of every lifter in its database.

What is the difference between DOTS and Wilks?

Both divide your total by a bodyweight polynomial. Wilks uses a fifth degree polynomial fitted in 1994, and DOTS a fourth degree one that came later. Their numbers are close but not equal, and they treat very light and very heavy lifters differently.

Which Wilks formula does this calculator use?

The original 1994 Wilks coefficients. A revised version from 2020 exists with different coefficients, so scores from the two are not interchangeable.

Do I enter my total in kg or lb?

Either. Switch the units next to the inputs and the numbers are converted to kilograms before the formulas run.

Your workout journal

Each set shows what you did last time. Connect Claude or ChatGPT whenever you like.

See a demo without signing up

Read next

ChatGPT and Claude workout tracker: log by chat, train in the appA workout tracker for ChatGPT and Claude: tell the assistant what you did or train from the app with last time's numbers. Every new chat reads the history. How to use ChatGPT or Claude as a personal trainerUse ChatGPT or Claude as a personal trainer: the first prompt, what it does well, where it forgets your training, and whether it can replace a coach. Claude personal trainer prompt: Project, Skill or connected logA Claude personal trainer prompt to copy into a Project, what a Project or a Skill keeps and loses, and when a connected workout log works better. Connect Garmin, Strava, Apple Health or Hevy to Claude and ChatGPTWhat connects today: Strava's official Claude connector, Apple Health in Claude and ChatGPT, Hevy's ChatGPT app, Garmin community servers and a writable log. How to import a ChatGPT or Claude workout plan into an appMove a workout plan that ChatGPT or Claude wrote into AIm: a sample plan to try, the exact steps, what to check before saving, and what an import cannot do. Progressive overload: how to do it, with a 5-week exampleProgressive overload is asking a little more of a muscle over time. When every set hits the top of your rep range, add the smallest weight step. Epley formula: 1RM calculator and one rep max chartEpley formula: 1RM = weight x (1 + reps / 30), so 100 kg for 5 reps is about 117 kg. Calculator, one rep max chart for 2 to 12 reps, Epley vs Brzycki. RPE calculator: estimated 1RM and RPE chart by repsEnter weight, reps and RPE to get your estimated 1RM, then see working weights for 1 to 10 reps at RPE 6 to 10, with the full RPE chart. Plate calculator: plates per side for a barbellEnter a target weight, your bar and your plates to see what goes on each side of the barbell, in kg or lb, plus the closest loadable weight. Tonnage calculator: total volume load of a workoutAdd your sets, reps and weights to get the total tonnage (volume load) of a workout, with total reps and average weight per rep, in kg or lb. Best workout split: full body, upper lower or push pull legs2 or 3 days: full body. 4 days: upper lower. 5: upper lower plus a push pull legs day. 6: push pull legs twice. Plus a PPL plan with sets and reps to copy. Muscle recovery time chart: hours and days for each muscle groupFrom 36 hours for abs and forearms to 84 for the lower back: a muscle recovery time chart for every muscle group, where the numbers come from and what changes them. How to add OAuth 2.1 to an MCP server using SupabaseSupabase ships an OAuth 2.1 authorization server, off by default. How to put it in front of a remote MCP server, what stays yours to build, and five bugs.