Tonnage calculator: total volume load
Fill in sets, reps and weight for each exercise. You get the total tonnage of the session, the reps and the average weight you lifted per rep.
Calculator
How tonnage is calculated
Tonnage, also called volume load, is the total weight you moved in a session: for each exercise, sets times reps times weight, added up. 4 sets of 5 at 100 kg is 4 x 5 x 100 = 2,000 kg. The three rows in the calculator, 2,000 + 1,920 + 1,440, make 5,360 kg over 80 reps, an average of 67 kg per rep.
Put one row per exercise, or one per block of sets at the same weight and reps. If the weight or the reps change between sets, give each change its own row. Leave out warm-up sets if you want the tonnage of the working sets only, which is the usual way to count it. Rows left empty or incomplete are skipped.
What the other numbers tell you
The average weight per rep is the tonnage divided by the total reps. It rises when the load goes up and falls with lighter, higher rep work, so it is a quick read of how heavy the session was on average.
Total reps and sets are the other two ways to count the same work. A session can have the same tonnage as last week and be very different: 10 sets of 3 at 100 kg and 3 sets of 10 at 100 kg are 3,000 kg each.
What tonnage can and cannot tell you
Tonnage is a simple way to track how much work you did. Over weeks, a rising weekly tonnage at similar effort is one sign that your training is progressing, and a sudden jump is a reason to check that your recovery keeps up. It has limits: it adds a heavy single and a light set of 20 together, it ignores how close each set was to failure, and it says nothing about exercise choice, since a ton on the leg press and a ton on the bench press are very different jobs. Compare tonnage for the same exercise or the same session over time, not across lifts.
The general idea of volume load, with the other ways of counting training dose, is covered in the review below. For the next step, the guide to progressive overload explains when to add weight or reps.
Logging volume in a journal
Tonnage is only useful if you count it the same way every session. In AIm you log each set with its weight and reps, in the app or by telling Claude or ChatGPT. For a workout you run in the app, AIm adds up weight times reps of the working sets, with sets marked as warm-ups left out, and the finish screen shows the tonnage and, when you have done that program day before, how it compares with last time. Use this page when you want to check a session you have not logged or plan one.
Other tools in this set: the 1RM calculator (your one rep max from any set), the DOTS calculator (DOTS and Wilks scores), the RPE calculator (the RPE chart and working weights), the plate calculator (plates per side for a barbell).
Sources
The review defines volume load as sets times reps times load and compares it with other ways of measuring training dose. The calculation is a plain sum.
Frequently asked questions
How do I calculate tonnage?
For each exercise multiply sets by reps by weight, then add the results. 3 sets of 8 reps at 60 kg is 3 x 8 x 60 = 1,440 kg.
Is tonnage the same as volume load?
Yes, the two names mean the same thing here: the total weight lifted, sets times reps times weight.
Should warm-up sets count?
Usually not. Count the working sets, so that tonnage reflects the work that trains you. Whichever way you choose, count the same way every session.
How do I count bodyweight exercises?
Enter your bodyweight, or the part of it you move, as the weight. For a pull-up that is your bodyweight plus any added weight. The result is an estimate, so compare it with your own earlier sessions.
Does it work in pounds?
Yes. Switch to lb and the weights are converted, and the tonnage is shown in pounds. One pound is 0.45359237 kg.